Light Duty Casters

Light-duty casters are typically rated between 75 and 350 lbs per caster. They use smaller wheel diameters (1.5" to 5"), lighter gauge housings, and softer tread materials. They are designed for indoor environments where floor protection, low noise, and compact overall height are priorities.

Soft rubber and thermoplastic rubber (TPR) treads are the best choice for hardwood, tile, and laminate floors. They roll quietly, absorb vibration, and will not scuff or scratch finished surfaces. Avoid hard nylon or polypropylene wheels on these surfaces -- they can dent or mark flooring over time.

Remove the old caster by pulling or unscrewing it from the leg socket. Measure the stem diameter (common sizes are 7/16", 1/2", and 5/8"), stem length, and the inside diameter of the socket in the furniture leg. Match these dimensions to the new caster's stem specifications. Grip ring stems simply press in, while threaded stems screw into place.

Yes. A standard office chair with an occupant weighing up to 250 lbs distributes that load across five casters, putting roughly 50 lbs on each wheel. A set of casters rated at 75-100 lbs per caster provides a comfortable safety margin. For heavy-duty office chairs or bariatric seating, look for casters rated 100-150 lbs each.

Our light-duty caster selection includes wheel diameters from 1.5 inches to 5 inches, with tread materials chosen for indoor use. Soft rubber and thermoplastic rubber (TPR) treads absorb vibration and roll quietly across tile, hardwood, and polished concrete without leaving marks. Nylon and polypropylene options handle moisture and cleaning chemicals in healthcare or food-service settings. Most light-duty models are available in both swivel and rigid configurations, with optional brakes for carts and mobile workstations that need to lock in place.

Mounting options in this class lean toward stem-type installations -- threaded stems, grip ring stems, and grip neck stems that insert directly into furniture legs and tubular frames. Top-plate mounts are also available for flat-bottomed equipment. If you are replacing worn casters on existing furniture, measure the stem diameter, stem length, and socket inside diameter to ensure a precise fit. Our product listings include all dimensional data to simplify the matching process.