E-line Swivel 5"x2" Cast Iron Wheel 4"x4.5" Plate Caster With 5-Inch Cam Brake; Part# ES5X2CIRCAMS

About This Caster - ES5X2CIRCAMS

Set this 5-inch cast iron swivel on a high-heat cart corner that needs a foot-cam brake at a mid deck height.

The 5-inch cam brake is a cam-action foot pedal that presses on the cast iron tread to lock the wheel, a larger, easier pedal to set than a side tread-lever. The cast iron wheel holds up from -40 to 600°F for an oven or foundry line, and at 5 inches it carries a high load and steers into a tight spot. The trade is a hard, noisy wheel that damages a soft floor, so it suits bare concrete. It runs on a roller bearing and bolts on a 4 by 4-1/2-inch top plate.

Ideal applications

• 5-inch cast iron swivel corners with a 5-inch foot-cam brake
• Cam pedal locking a 5-inch cast iron wheel to 600°F
• Cam-braked swivel corner on bare concrete at a mid deck

For a smaller 4-inch wheel on the same 5-inch cam, the ES4X2CIRCAMS keeps a lower deck.

Pairs with: plain cast iron swivel and rigid casters on the other corners.

Wrong fit? Need a side tread-lock or a 7-inch cam? See the tread-lock ES5X2CIRTBK and the 7-inch cam-brake ES6X2CIRCAML.

Also in this family: the 4-inch total-lock ET4X2CIR, or the full Pemco collection.