5/8"-11 x 8" Threaded Stud Steel Leveling Mount with 4" Nylon Base - BNYLC48

About This Leveling Mount - BNYLC48

Specify the BNYLC48 for heavy equipment that has to level on a floor you cannot mark, a wide 4-inch nylon base on a long 5/8-11 x 8 stud that spreads real weight and still leaves the surface clean.

The 4-inch nylon pad is what separates this from the smaller nylon mounts: a heavy machine needs the area to keep contact pressure low, both so the load does not dent a finished floor and so the nylon itself does not cold-flow under a point load. The long 5/8-11 stud gives a tall frame the travel to come level over a high spot. A heavy unit on a steel foot would gouge and rust a clean floor; the wide nylon base carries the load and protects it.

Ideal applications

• Heavy cabinet or case leveled on a showroom or museum floor
• Large food-area frame on epoxy that must stay scuff-free
• Tall equipment base needing reach over a finished high spot

Skip the BNYLC48 if the floor pitches hard under the load; a fixed nylon pad edge-loads on a slope, so the swivel BSW-5 seats flatter on the same 4-inch footprint.

Pairs with: the lighter BNYLB24 on the unloaded corners of a finished-floor frame.

Wrong fit? Sloped floor, or heavy traffic? See the swivel BSW-5 and tapped TSW-5.

Also in this family: BNYLA24, BNYLB24, and the full Leveling Mounts collection.