5" Rubber 2 Series Swivel Caster - 2.05256.613 H

About This Caster - 2.05256.613 H

Bolt this 5-inch high-temp rubber swivel with the Teflon bearing and aluminum core to a cart that rolls through heat but still needs a cushioned tread, the tall ThermoTech rubber rated to roughly 490 degrees and the aluminum hub that carries the heat away from the wheel.

Where a glass-filled nylon wheel is hard, this ThermoTech rubber stays resilient and cushions the load while taking the heat, the aluminum core pulls heat out of the tread, the Teflon bearing turns at temperatures a ball or Delrin bearing could not, and the swivel steers the rack into an oven or wash tunnel. The tall 5-inch wheel clears the biggest thresholds. Confirm your plate pattern and temperature before you order. It is the tall resilient high-heat rubber swivel for an oven or heat-tunnel rack that needs a cushioned roll.

Ideal applications

• Oven or heat-tunnel rack that needs a cushioned high-heat tread
• Aluminum-core wheel that carries heat away from the rubber
• Teflon bearing that turns where packed bearings fail

Need the hardest high-heat wheel, or no heat at all? A glass-filled nylon HT wheel runs harder and a rubber wheel suits room temperature.

Pairs with: the ThermoTech aluminum-core 4-inch rigid 31L1D40G-03 on the trailing corners.

Wrong fit? Need the brake, or a hard high-heat wheel? See the braked ThermoTech swivel 31L1C50V02-03 and the glass-filled nylon 5-inch high-temp rigid 31R1D50G-03.

Also in this family: the polyurethane Delrin plate swivel 31JH50V02-03, or the 2 Series caster collection.