4" Rubber 2 Series Rigid Caster - 2.04208.613 H

About This Caster - 2.04208.613 H

Bolt this 4-inch high-temp rubber rigid caster with the Teflon bearing and aluminum core to a cart that rolls through heat but still needs a cushioned tread, the ThermoTech rubber rated to roughly 490 degrees and the aluminum hub that carries the heat away from the wheel.

Where a glass-filled nylon wheel is hard, this ThermoTech rubber stays resilient and cushions the load while taking the heat, the aluminum core pulls heat out of the tread, the Teflon bearing turns at temperatures a ball or Delrin bearing could not, and the rigid yoke tracks the rack straight into an oven or wash tunnel. Confirm your plate pattern and temperature before you order. It is the resilient high-heat rubber rigid for an oven or heat-tunnel rack that needs a cushioned roll.

Ideal applications

• Oven or heat-tunnel rack that needs a cushioned high-heat tread
• Aluminum-core wheel that carries heat away from the rubber
• Teflon bearing that turns where packed bearings fail

Need the hardest high-heat wheel, or no heat at all? A glass-filled nylon HT wheel runs harder and a rubber wheel suits room temperature.

Pairs with: a matching high-temp 4-inch swivel on the leading corners (see the 2 Series caster collection).

Wrong fit? Want a hard high-heat wheel or a cool-floor tread? See the glass-filled nylon high-temp rigid 31R1D40G-03 and the rubber Delrin rigid 31MH40G-03.

Also in this family: the polyurethane Delrin rigid 31JH40G-03, or the 2 Series caster collection.