3.5" Glass-Filled Nylon 2 Series Swivel Caster - 2.03256.52 HT MTG59

About This Caster - 2.03256.52 HT MTG59

Bolt this 3.5-inch glass-filled nylon swivel with the plain bearing and oversized 4-1/8 by 3-1/8 inch plate to a heavier oven rack drilled for the larger pattern, the high-heat Brown wheel rated to roughly 480 degrees and the bigger plate that spreads the rack load on more steel.

Glass-filled nylon holds its capacity at heat that softens rubber, so the wheel rolls through ovens and heat tunnels, the plain bore takes the temperature where a packed bearing would fail, and the oversized 4-1/8 by 3-1/8 inch plate spreads a heavier rack load over more deck than the standard plate. The hard wheel rolls easy but passes more shock. Confirm your frame is drilled for the 4-1/8 by 3-1/8 pattern and check your temperature before you order. It is the high-heat oversized-plate glass-filled nylon swivel for a heavier oven rack.

Ideal applications

• Heavier oven rack drilled to the oversized 4-1/8 x 3-1/8 pattern
• High heat that needs the load spread on a bigger plate
• Oversized-plate rack where heat rules out a packed bearing

Rack is standard-sized, or the floor is cool? The standard high-temp plate or a softer rubber tread fits better.

Pairs with: the glass-filled nylon high-temp rigid 31R1D35G-03 on the trailing corners.

Wrong fit? Need the standard plate or a quiet bearing? See the standard high-temp swivel 31R1D35V-03 and the oversized-plate rubber Delrin swivel 32MH35V-03.

Also in this family: the polyolefin ball plate swivel 31GB35V-03, or the 2 Series caster collection.