10"x 2-1/2" Swivel Caster with Moldon Rubber Wheel, Albion 62 Series - 62MR10407S

About This Caster - 62MR10407S

Put this 10-inch 62 Series swivel on the front of a heavy cart that has to clear thresholds and stay quiet, the mold-on rubber caster whose iron-cored wheel carries the load that crushes a plastic-cored rubber wheel.

Mold-on rubber bonded to a cast iron core gives the quiet, non-marking roll of rubber with the load capacity of an iron-cored wheel, so it carries weight that crushes a plastic-cored rubber wheel. At 10 inches this is the tallest wheel in the series; it rolls over thresholds, hoses, and broken floor a shorter wheel stops on, and the wide 2-1/2 inch tread spreads the load to protect the finish. The swivel turns on a roller bearing, and the 6-1/4 by 4-1/2 plate bolts to a flat deck. Good to 180°F.

Ideal applications

• Front of heavy carts clearing thresholds and hoses
• Tallest 10-inch wheel rolling over broken floor quiet
• Wide 2-1/2 inch tread spreading an iron-core load

Skip the rubber wheel if the floor runs hot past 180°F or the load needs the highest impact rating; a cast iron 62CA08201R takes heat to 800°F where rubber cannot.

Pairs with: the 62MR10407R rigid on the back corners of a tall cart.

Wrong fit? Need heat past 180°F or the highest impact rating? See the cast iron 62CA08201R and the 62 Series collection.

Also in this family: the 8-inch mold-on rubber 62MR08201S, or the full Albion caster collection.