About This Guide
Automated Guided Vehicles (AGVs) and their close relatives, tugger trains, autonomous mobile robots (AMRs), and automated towline carts, are rapidly replacing or supplementing manual cart systems in warehouses, manufacturing plants, and distribution centers. The casters on AGV-towed carts and AGV-adjacent equipment are a critical and often overlooked specification.
This guide covers what makes AGV caster selection different from standard industrial casters, and what to specify for the most common automated material handling scenarios.
Key Considerations
AGV Equipment Categories and Their Caster Requirements
1. AGV-Towed Carts (Tugger Trains)
An AGV tugger tows a string of carts through a facility on a programmed path. These carts travel at defined speeds (typically 2-5 mph), navigate pre-programmed curves with fixed radii, are loaded and unloaded at specific stations, and cycle continuously for one or more shifts.
Caster requirements for towed carts include swivel lead engineered to the cart wheelbase and minimum curve radius (same as towline), kingpinless swivel rigs (the combination of speed, load, and constant direction changes eliminates standard kingpin casters quickly), wheel material appropriate for the floor (polyurethane standard on sealed concrete), no brakes on casters in the travel configuration, and low rolling resistance since AGV motor load is directly affected by cart rolling resistance.
2. AMR (Autonomous Mobile Robot) Bodies
AMRs are self-powered robots that navigate independently using sensors, cameras, or magnetic tape. AMR-adjacent carts (carts that AMRs interact with but don't power) have standard caster requirements: appropriate load capacity for the goods being carried, consistent caster height (critical, AMR docking and lifting mechanisms require precise cart height), and low-dust wheel materials in cleanroom environments.
3. Automated Conveyor and Roller Line Carts
Carts that interface with automated conveyors must have precise deck height matching conveyor interface specifications, wheel and caster dimensions that allow proper entry and exit from conveyor lines, and locking capability at conveyor stations (total-lock casters or separate mechanisms).
4. Automated Rack and Shuttle Systems
Vertical and horizontal storage shuttle systems (AS/RS) use rail-guided casters with V-groove steel or nylon wheels for rail tracking, precision-fitted to the rail system specifications, and high cycle life (automated systems run continuously).
The Critical Dimension: Consistent Cart Height
In automated environments, cart height is a safety-critical specification. AGVs that lift, transport, or dock with carts rely on precise height for lift mechanism engagement (too high or too low and the AGV cannot engage the cart), conveyor transfer (deck height must match the conveyor height within a small tolerance), and docking accuracy (sensors and cameras use floor-to-cart reference points).
This means all casters on an AGV-compatible cart must have exactly the same wheel diameter and swivel rig height, replacement casters must match original specifications exactly, don't substitute a "close enough" replacement, and as casters wear, the cart deck height changes, worn casters should be replaced as a set, not individually.
Document your cart height spec and check it as part of regular maintenance. A cart that has settled 3/16" due to wheel wear may no longer mate correctly with the AGV interface.
Floor Quality Requirements for AGV Operations
AGVs are far more sensitive to floor quality than manually pushed carts, and the caster selection should reflect the floor condition.
Smooth, Well-Maintained Concrete or Epoxy: Standard polyurethane casters perform well. Minimum wheel diameter 4"; larger for heavier loads.
Floors with Expansion Joints, Cracks, or Transitions: Larger wheel diameters clear these obstacles better. Soft polyurethane handles transitions with less shock. Major floor defects should be repaired before AGV deployment, AGVs are less tolerant of floor variation than human operators.
Floors with Debris or Contamination: Hard wheel materials (nylon, phenolic) are more resistant to debris embedding. Regular floor sweeping reduces rolling resistance and extends caster life.
Multi-Surface Paths (Indoor/Outdoor or Mixed): Larger diameter, semi-soft polyurethane handles the widest range of surfaces. Pneumatic or foam-filled options for significant outdoor use.
ESD Casters in Automated Environments
Automated facilities that handle electronic components often require ESD (electrostatic dissipative) casters throughout the facility, not just in manual handling areas. Autonomous robots moving at speed can generate significant static buildup, and static discharge is cumulative, multiple discharge events from multiple carts can affect electronics.
Verify ESD requirements with your facility's EH&S team. Conductive and static-dissipative caster options are available in polyurethane wheel compounds compatible with automation environments.
Maintenance in Automated Operations
The higher cycle rates and continuous operation of automated systems make caster maintenance more critical, and more difficult to schedule.
Design for maintenance:
- Specify casters with lubrication fittings on high-cycle carts (allows re-greasing without replacement)
- Use kingpinless rigs that hold alignment over longer service intervals
- Keep a documented spare caster inventory matched to each cart specification
- Plan caster replacement in maintenance windows, don't wait for failure in an automated system
Predictive maintenance indicators:
- Increased AGV motor current draw (indicating increased cart rolling resistance from worn casters)
- Cart height out of specification
- Visible flat spots, cracks, or bearing noise during maintenance inspection
Working with AGV Manufacturers and System Integrators
AGV system integrators typically specify or approve the caster used on compatible carts. Key steps:
- Get the cart height specification from the AGV/integrator before ordering casters
- Confirm swivel lead requirements if the cart is towed by the AGV (vs. being carried by it)
- Confirm ESD requirements with the integrator
- Ask about approved equivalent specifications, some integrators will approve alternate suppliers if the spec is matched exactly
- Get documentation, for regulated industries, document the caster specification and any integrator approval
AGV Equipment Types & Caster Specifications
| Equipment Type | Caster Configuration | Wheel Material | Key Specification |
|---|---|---|---|
| AGV-Towed Carts | Kingpinless swivel + rigid | Polyurethane | Swivel lead matched to curve radius |
| AMR-Adjacent Carts | Standard swivel + rigid | Polyurethane / Low-dust | Consistent caster height (precision) |
| Conveyor Line Carts | Total-lock capable | Polyurethane | Deck height matching conveyor |
| AS/RS Shuttle Systems | Rail-guided rigid | V-groove steel / nylon | Precision rail fit, high cycle life |
Selection Criteria
Step 1: Identify the AGV System Type
Determine whether your carts are towed (tugger trains), carried (AMR-lifted), or conveyor-interfacing. Each has fundamentally different caster requirements.
Step 2: Get Dimensional Specifications from the Integrator
Before ordering any casters, obtain the exact cart height specification, swivel lead requirements (if towed), and mounting pattern from your AGV manufacturer or system integrator.
Step 3: Match Wheel Material to Floor Condition
Assess your floor type, smooth concrete, epoxy, expansion joints, outdoor transitions, and select the appropriate wheel compound. Polyurethane is standard on sealed concrete; consider harder compounds for debris-prone floors.
Step 4: Specify Kingpinless Rigs for Towed Applications
Any cart that is towed through curves under load should use kingpinless swivel rigs. Standard kingpin rigs will fail prematurely under the combination of speed, load, and constant direction changes.
Step 5: Verify ESD Requirements
If your facility handles electronic components, confirm ESD caster requirements with your EH&S team before ordering.
Step 6: Plan for Set Replacement
In automated environments, replace casters as a complete set per cart, not individually. Mixed new and worn casters create height inconsistency that can cause AGV engagement failures.
Frequently Asked Questions
Not without confirming the height specification and swivel lead requirements. The functional specification (load capacity, wheel material) is secondary to the dimensional specification (height, swivel lead, mounting pattern) in AGV applications.
Often yes. Worn casters reduce overall cart height. Check wheel diameter (worn vs. new) and compare to original specification. Replace as a set if wear exceeds 1/8" from original diameter.
Some manufacturers produce casters specifically dimensioned and rated for common AGV cart specifications. Contact Caster Central with your cart model and AGV system for a matched recommendation.
Need Help with Your Caster Order?
Visit the resources linked below including everything you need to get you started!