E-line Swivel 4"x2" Cast Iron Wheel 4"x4.5" Plate Caster With Total Lock; Part# ET4X2CIR

About This Caster - ET4X2CIR

Set this 4-inch cast iron swivel on a compact high-heat cart corner that must park dead still.

The total lock fixes the cart completely: one pedal stops the wheel rolling and locks the swivel from turning at the same time, so a loaded cart stays exactly where it was set instead of drifting on its swivel. The cast iron wheel holds up from -40 to 600°F for an oven or foundry line where rubber or poly would soften, and at 4 inches it keeps the deck low. The trade is a hard, noisy wheel that damages a soft floor, so it suits bare concrete. It runs on a roller bearing and bolts on a 4 by 4-1/2-inch top plate.

Ideal applications

• Compact 4-inch cast iron corners that park dead still in heat
• Total lock holding the wheel and swivel on a cast iron caster
• Swivel locked corner on bare concrete at a low deck

If holding the wheel alone is enough, a cam-brake swivel locks the roll without the swivel.

Pairs with: plain cast iron swivel casters on the rolling corners and this total lock on a parking corner.

Wrong fit? Only need a wheel brake or a bigger wheel? See the 4-inch cam-brake ES4X2CIRCAMS and the 5-inch total-lock ET5X2CIR.

Also in this family: the 6-inch total-lock ET6X2CIR, or the full Pemco collection.